ATTO Technology UL2D Especificaciones descargar pdf (Pagina 102)

7-12

Installing and Verifying Avid System Software

7-12

Installing and Verifying Avid System Software

Verifying and Changing Disk Controller Drivers Status

The following subsections explain how to verify the installation of the

disk controller drivers and how to change the status (if needed in the

hardware profile).

Verifying and Changing the ATTO ExpressPCI UL3D Driver

Installation and Status

Use the following procedure to check the status of the ATTO driver

only if the board is in the system:

1. Open the Control Panel and double-click the Devices icon.

2. Use the scroll bar to find the Express driver and click to select it.

3. Check the Status column for a device status of Started. This

indicates that the driver installed and initialized properly.

4. Click the Startup button.

5. Under the Startup Type section ensure that the radio button

marked Boot is selected.

6. Click the Hardware Profile button.

The Device window opens.

7. Select Original Configuration and click the Disable button.

You should now see Express disabled for the Original

Configuration and enabled for the Avid Configuration.

8. Click OK.

9. Click the Close button.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 117 118

Sin comentarios

ATTO Technology UL2D Especificaciones Pagina 102