Atto-technology 2400C/R/D Manual de usuario descargar pdf (Pagina 23)

Here, type in your user name and password,

and click

OK.

1The

Status page appears.

2 From the ExpressNAV main menu, click on the

Mapping menu item on the left side of the

screen.

3The

Mapping page appears. Wait for the

automatic scan for devices to complete.

4 Select the devices from the box on the right

hand side of the screen and drag to the

appropriate LUN on the left.

5 Click

Submit. All the commands necessary to

enable mapping and the command

saveconfiguration norestart are performed.

Multiple Node addressing (FB2400 only)

The FibreBridge has a unique Port name for each

Fibre Channel port. By default, each Fibre Channel

port also has a separate unique Node name: the host

computer perceives the FibreBridge as two separate

entities, allowing mapping of a different set of logical

units to each FC port.

You may use a combination of the Command Line

Interface and ExpressNAV to change the default

setting to create a single Node name for the

FibreBridge and map devices to that node.

1 Connect to the FibreBridge using the

Command Line Interface as described in

Interface options

on page 27.

2 At the

Ready prompt, type

set FCMultiNode disabled

Note

Changing the state of the

FCMultiNode

command causes all maps to be deleted.

3Press Enter.

4Type

saveconfiguration restart.

5Press Enter.

6 Follow the directions in Mapping devices

automatically or

Mapping devices manually.

above.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 49 50

Comentarios a estos manuales

Sin comentarios

Atto-technology 2400C/R/D Manual de usuario Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Atto-technology 2400C/R/D