ATTO Technology UL2D Guía de usuario descargar pdf (Pagina 19)

Chapter 4: Installing AVoption 13

Installing AVoption Hardware

AVoption PCI Slot Conﬁgurations

To install your AVoption hardware, ﬁrst deter-

mine the PCI slots where you will install the

hardware. For detailed information, see

Appendix A, “Slot Conﬁgurations for AVop-

tion.”

Audio Hardware

Refer to the TDM Hardware Installation Guide for

audio hardware installation information. You

may be required to move hardware that is al-

ready installed to new PCI slot locations in your

computer or expansion chassis, based on the in-

formation in Appendix A, “Slot Conﬁgurations

for AVoption.”

Installing AVoption Video

Hardware

To install AVoption video hardware:

1 Unplug and open your Macintosh computer

or your Magma expansion chassis according to

the instructions included with it.

2 Release any static electricity by touching the

power supply of the CPU, or another grounded

item.

3 Remove the ABVB card from the antistatic

bag, being careful to handle it only by the edges.

4 Line up the ABVB card with the installation

slot, and slide the card gently into place so the

PCI connector is lined up with the PCI slot.

5 Press down ﬁrmly on the card with even pres-

sure. The connector should click into place in

the PCI slot.

6 Repeat this process for the Janus Advanced

JPEG card, making sure that you place it in the

proper slot.

ABV card and ribbon cable

PCI card alignment and installation

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 70 71

Sin comentarios

ATTO Technology UL2D Guía de usuario Pagina 19