ATTO Technology UL2D Guía de usuario descargar pdf (Pagina 20)

AVoption and AVoption XL Guide16

5 Press down ﬁrmly on the card with even

pressure. The connector should click into

place in the PCI slot.

6 Repeat this process for the Janus Ad-

vanced JPEG card, making sure that you

place it in the proper slot.

7 Attach the ribbon cable from the ABVB

board to the connector on top of the Janus

Advanced JPEG card by aligning the cable

end with the connector, and gently press-

ing it onto the card until it clicks into

place.

8 Close the computer or expansion chassis.

Installing the Digidesign

SCSI 64 / ATTO EPCI-DC

SCSI Accelerator Card

To install the ATTO ExpressPCI Dual-Channel

SCSI Accelerator:

1 Unplug and open your Macintosh com-

puter or expansion chassis according to the

instructions included with it.

2 Release any static electricity by touching

the power supply, or another grounded

item.

3 Remove the ATTO card from the anti-

static bag, being careful to handle it only

by the edges.

4 Line up the ATTO card with the installa-

tion slot, and slide the card into place gen-

tly so the PCI connector is aligned with the

PCI slot.

5 Press down ﬁrmly on the card with even

pressure. The connector should click into

place in the PCI slot.

6 Fasten the card in place using the in-

cluded screw to attach the card bracket to

the computer mounting bracket.

PCI Card alignment and installation

ABVB card and Janus Advanced JPEG card installed

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

ABVB card

Janus card

Ribbon cable

Digidesign SCSI64 / ATTO EPCI-DC SCSI Accelerator

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 50 51

Comentarios a estos manuales

Sin comentarios