ATTO Technology 2400C/R/D Manual de instrucciones descargar pdf (Pagina 17)

LED indicators

The LED indicators can be viewed from the connector

side and the front side of the FibreBridge 2400R/D.

(See Exhibit 1.4-1)

LEDs on the connector side are:

A bicolor Ready/Fault LED

lights green to indicate

ready, lights yellow to show a faulted condition, and is

off to indicate not ready.

Embedded in the Ethernet port connector:

lighted green LED shows a valid link; off indicates

that no link is present. A separate blinking yellow LED

indicates activity.

Fibre Channel port:

A lighted green LED indicates

link; off means no link. A separate green LED

indicates activity if it is lit, no activity if it is off.

SCSI ports:

A green LED on each port indicates

activity if is lit.

LEDs on the faceplate are:

A bicolor Ready/Fault LED

is lighted green to

indicate ready, lighted yellow to show a faulted

condition, and off indicates not ready.

SCSI ports:

A green LED on each port indicates

activity if is lit.

Fibre Channel port:

bicolor LED indicates FC

speed. If it is off, speed is 1-Gb; if it is green, 2-Gb, and

yellow indicates 4-Gb FC. A separate green LED

indicates activity if it is lit, no activity if it is off.

Exhibit 1.4-1 Connectors, LEDs and power receptacle

Ready/Fault LED

Ethernet port

Fibre Channel ports

SCSI ports

SCSI activity LEDs

FC activity & link LEDs

Serial port

Power receptacle

air vents

Reset switch

on the connector side and LEDs on the faceplate

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 58 59

Comentarios a estos manuales

Sin comentarios

ATTO Technology 2400C/R/D Manual de instrucciones Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ATTO Technology 2400C/R/D