ATTO Technology Diamond Storage Array S-Class Instrucciones de operaciones descargar pdf (Pagina 49)

Fibre Channel CLI commands

FcPortInfo

Retrieves information about the current state of each

Fibre Channel port. The status field indicates ‘disabled’

when a port has been internally disabled.

Immediate command: FcPortInfo

FcPortList

Lists the status of all available Fibre Channel ports.

Get syntax: FcPortList: [line count]

FcPortName

Returns the Fibre Channel port name stored in NVRAM

for this Fibre Channel port.

Get syntax: get FcPortName [port number]

FcWWName

Sets or view the Word Wide Name (WWN) of the

referenced Fibre Channel port. The WWN is a unique 8-

byte number that identifies the port on a Fibre Channel

network. Only the three least significant bytes of the

WWN can be modified. Fabric and loop operations are

unpredictable if duplicate WWNs are assigned.

Default: 20 00 0x where x is for 0 for port 0, 1 for port 1

Set syntax: set FcWWName [PortNumber [0 | 1]

Requires a SaveConfiguration command

Get syntax: get FcWWName [PortNumber [0 | 1]

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 104 105

Sin comentarios

ATTO Technology Diamond Storage Array S-Class Instrucciones de operaciones Pagina 49